our online m
ystem, thank you for your valuable advice or related con-
sulting, we will respo-
nd promptly, please pay attention to access to our reply to you ...
Installation and operation precautions when the shot blasting machine
發布者：admin 發布時間：2012/2/25 13:18:23 點擊：2514
Shot blast cleaning machine during the installation Note:
(1)A host in place: the host in place when its level of weight degree must meet the requirements of the drawings.
(2)Two sub-components, installation should be first carried out.
(3) Road, rail or catenary. Roller should be caused by the device within the periphery.
(4) should be in testing the first part of the pre-test normal after all the running.
Note operatives in the process of operating the equipment:
(1)It should be noted that the normal instrument display of the electrical cabinet.
(2) all into the blasting chamber must wear goggles and helmets.
(30The operator must check the equipment every day.
Including: lubricating parts and mechanical parts of the lubrication part, such as: speed reducer. Hydraulic oil mist, and bearing chain. The mechanical parts such as: rotating parts wear wearing parts wear.
Cases: if the vibration of the blast wheel must be shut down immediately replace the blade, wear every day for registration and to the timely replacement of wearing parts.
(4)Lubrication part should ensure timely refueling.
(5)Directional sets must be timely adjustment and replacement.
(60. Every day to check the adequacy of steel shot amount.